So, is there any videos out that can guide me through this here, I'm blanking out on how to use this FK with enabled IK chain,what is the purpose of this feature and how can I get my joints to follow the controls ?
It appears you enabled "Make Simulated" for your FK chain module. The joints will only react to movement if you press play on the timeline or use Maya's Interactive Playback (FX Menu Set > Fields Solver Menu > Interactive Playback).
If you want to disable the simulation, there are three ways to do this:1. Select the Sim Attr Control (the box above the first joint), and set the chain to Static.
2. In RRM3 Selector you can right click on a Sim button and set the chain's Simulation Mode to Static.
3. Select any Sim Ctrl and use the RRM3 marking menu to set the simulation mode. Or, you can select any control of the rig and use the "Simulation All..." to set all the FK chains' sim options at once.
Make sure to switch it back to Dynamic when you want to have them simulate again.
oh, y, that might be it. thanks
It appears you enabled "Make Simulated" for your FK chain module. The joints will only react to movement if you press play on the timeline or use Maya's Interactive Playback (FX Menu Set > Fields Solver Menu > Interactive Playback).
If you want to disable the simulation, there are three ways to do this: 1. Select the Sim Attr Control (the box above the first joint), and set the chain to Static.
2. In RRM3 Selector you can right click on a Sim button and set the chain's Simulation Mode to Static.
3. Select any Sim Ctrl and use the RRM3 marking menu to set the simulation mode. Or, you can select any control of the rig and use the "Simulation All..." to set all the FK chains' sim options at once.
Make sure to switch it back to Dynamic when you want to have them simulate again.